Waterline Measurement???

[wiatowski]

I posted this on my other thread but I thought I'd post a new thread about it.
I need the waterline measurement for the new stripe.
From the rub rail down... under the center of the rear cleat and the front of the vent, and at the front of the bow. Please!


Forgot to add that I need the dimensions for the wave too.

Thanks

[michael hunter]

This is off my 89 Sunsport
Its 22 9/16 '' from the bottom of the rub rail at the center of the front vent.
Its 17 5/8'' from the bottom of the rub rail at the center of the rear cleat.





Its 7 3/4'' from the bottom of the hull to the bottom of the stripe in the front.
Its 7 1/4 from the bottom of the hull to the bottom of the stripe in the rear.

[michael hunter]

The wave is 11 5/8'' from the bottom of the rub rail and 8'' from the rear of the boat.

[wiatowski]

The wave is 11 5/8'' from the bottom of the rub rail and 8'' from the rear of the boat.

thanks don't suppose I could trouble you for the wave dimensions?
wave.jpg

[michael hunter]

Ill check tomorrow.

[wiatowski]

thank you!

[michael hunter]

wiatowski
I found the replacement blue waves I got in 1989 but never put on. When I replaced my waves I didn't use them because of their age.
I did use them as a template foe the vinyl sign guy to copy. I scanned it so you can copy if this doesn't work I will email you a copy.

[wiatowski]

thanks a bunch! what are the dimensions of it though? L and W?

[michael hunter]

The curved side is the widest then it tapers down to the point give me your email and I will send the pics to you then you can print them and tape them together for an exact copy.

[wiatowski]

don't suppose some one could measure from the rub rail directly on the bow down to the bottom of the blue stripe? I need a front point of reference.